OK, the finale! In part one we looked at the growth of passive building and how it’s reflected in Passive Place at BE13.
In part two we embarked on the passive building tour of the BE13 trade show floor–mapped to the fundamental principles of passive building.
Today, we introduce some unofficial passive building principles and visit some terrific partners.
Unofficial passive building principle No. 6:
ASSURE QUALITY AND MEASURE YOUR SUCCESS!
PHIUS (www.passivehouse.us) offers certification programs for projects and products. PHIUS+ Certification for new and retrofit applications is the only voluntary certification program in North America that requires a thorough design as well as an onsite third party review process. PHIUS+ certification is the most rigorous on the market–and the best value. That’s because PHIUS has partnered with the Department of Energy and RESNET. That means industry-standard certification protocols for design and onsite verification. And it means one-stop certification shopping. Earning PHIUS+ Certification also nets a HERS rating, DOE Challenge Home Status, and EnergyStar status.
PHIUS+ has jumpstarted certifications. We expect to have fully certified approximately 100 passive building projects by the end of 2013 in North America (if apartments are counted, then the number is closer to 200) and yes, the growth is exponential!
At the 7th Annual North American Passive House Conference in Denver last September, PHIUS launched its Window Data Verification Program. In cooperation with NFRC PHIUS is identifying a North American window data verification protocol and climate appropriate guidelines and recommendations. Several leading window manufacturers have signed on and submitted various window frame and glazing combinations for calculation and verification, and listing in the coming PHIUS window data base.
PHIUS recently partnered with PowerWise Systems–Booth 961 (http://www.powerwisesystems.com/passive) to promote their newest product – the inView Passive™ monitoring package. PowerWise offers all kinds of monitoring solutions for all building types—but we’re really excited about the value that the inView Passive monitoring package brings to our community. For passive builders, the proof is in the pudding–monitored performance is where it’s at. inView Passive includes monitoring dashboards optimized for typical passive house components and systems. We think it’s a great tool for anyone certifying a project through the PHIUS+ Certification and Quality Assurance Program.
Besides verifying predicted performance, monitoring systems like inView Passive can serve as early alerts for routine maintenance. For example, energy consumption might rise because a filter in the ventilator has not been cleaned on schedule. Monitoring also provides safety. Say one of the two ventilator fans fail; this could depressurize the house. Without monitoring, it might take some time to notice that indoor air quality declined, back drafting on vented appliances or fireplaces might have occurred or radon levels might have climbed.
inView Passive includes dashboards for typical passive house systems and components and indoor air aspects. Even a closed ground loop defrost system dashboard is included. Information on ordering the system and prices can be found on PHIUS’s website or on the PowerWise website. PHIUS has negotiated a 5% discount for all PHIUS+ certification enrolled projects and the Promo Code is available through PHIUS when registering.
The Energy Conservatory–Booth 828 (http://www.energyconservatory.com/) is the PHIUS+ Certified Rater’s best friend. Commissioning equipment for low load and airtight superinsulated homes has become more sophisticated and is now affordable. What exactly has to be commissioned and tested? The most obvious—the air-tightness of the envelope needs to get tested during construction and then again upon project completion. For very tight homes the rater can now use the Mini-Fan Blower Door System, a duct blaster in a newly developed red door insert to test the entire building, A small fan is all it takes if the home is that tight! The mechanical ventilation system also has to be commissioned and flows have to be verified. Very small ventilation air flows need to be measured. The Energy Conservatory Flow Blaster Accessory measures air flows at diffusers down to very low levels such as 10 CFMs. And lastly FLIR infrared cameras are used to check insulation quality, thermal bridging and also interior surface temperatures. Indispensable tools throughout QAQC process to verify a building has been built as designed and performs.
Unofficial passive building principle No. 7:
SPREAD THE WORD, SHARE THE TALE AND TEACH ALL YOU HAVE LEARNED
The leading national passive building research, education and alliance organizations are the Passive House Institute US (PHIUS) (www.passivehouse.us) and the Passive House Alliance US (PHAUS) (www.phaus.org).
PHIUS was founded by myself and Mike Kernagis in 2003, initially as Ecological Construction Laboratory, a non-profit, promoting and building passive houses for low income home buyers. It changed its name later to Passive House Institute US when it went national. Since 2008 PHIUS has been offering the hugely successful CPHC®Passive House Consultant training nationwide (NEW in 2013: Virtual segment online saving cost and travel time), we have added Certified PHIUS+ Rater trainings and PHIUS Certified Builder trainings over the last few years. We have trained more than 800 architects, engineers, energy consultants and builders and have certified more 500 of them as CPHCs, PHIUS Certified Builders and PHIUS+ Raters in the US and Canada. These are the folks you want on your passive building team!
In 2013 the renowned Fraunhofer Institute for Building Physics, PHIUS and Owens Corning collaborated on a new next-generation passive building modeling tool – WUFI© Passive. WUFI Passive now replaces PHPP as the backbone tool of the CPHC training. Like PHPP, the tool includes a static passive house energy balancing capability. But it also offers dynamic whole building energy modeling and individual component hygrothermal analysis. And it covers another critical modeling variable: thermal mass, which is necessary for the cooling energy balance. In WUFI Passive all of these assessments use the same project data; no double entry of project data in multiple modeling tools is necessary. Risk and performance management all in one. This tool is seriously cool!
In 2009 PHIUS launched a membership/chapter program, the Passive House Alliance US (PHAUS). The mission: to support the community of professionals who had been trained, to educate the public, and drive the market by involving manufacturers and advocating for making passive building standards the norm in North America. Since Mark Miller took on the Executive Director role of this ambitious program in 2011, PHAUS has a thriving and growing membership program, now up to 350 members. PHAUS’ manufacturer sponsors program (amongst them founding sponsor CertainTeed and Rocky Mountain Institute) is growing, as is the chapter organization—now up to 13 nationwide Chapters with two pending.
PHIUS and PHAUS have significantly shaped the landscape of passive buildings in America over the past 10 years and will continue on our mission: the transformation of the marketplace to make passive buildings commonplace. We are a non-profit and if you like what we have done so far and would like to help, you can donate to PHIUS, become a PHAUS member, or certify and train with us.
Building Science Corporation (http://www.buildingscience.com/) has been a leader in high performance building consulting and education for decades. BSC Principal Joe Lstiburek was a pioneer way back in the 1970s; that’s why at his keynote address at last year’s 7th Annual North American Passive House Conference, he closed his presentation with: “You guys are family.” I was totally moved—and I wasn’t alone. It was inspiring. Joe started building superinsulated buildings in the late 70s when he was just 23 years old!!! The details matched what we consider to be good passive building practice today. He has been on the forefront all along – vapor retarders, thermally broken fasteners, insulated foundation systems, energy heel trusses and even earth tubes (which he is not a great fan of )(link to his article). He knows what the trenches look like.
Building on that energy from the conference, BSC and PHIUS resolved to work together in promoting passive buildings. A first step: We decided to cooperate on the Passive Building University which lives on the PHAUS website (link): BSC bookends PHIUS executive certification classes with a Building Science Fundamentals program, the ultimate preparation for the CPHC Passive House Consultant class. BSC also offers Advanced Hygrothermal Analysis, truly building a science master class. I encourage you to visit BSCs table as they have the best selection of cutting edge literature that applies to passive buildings. Be prepared to spend some money and schlep books home!
Yestermorrow Design/Build School (http://www.yestermorrow.org/) This past December I arrived in Warren, Vt.,for the second CPHC class offered through the Yestermorrow Design/Build school. Yet another full class, intense and dynamic.
How is Yestermorrow different? It teaches all modules in person on 8 consecutive days with the exam on the 9th. People are on site 24/7, they form study and discussion groups beyond the class time and prep for exam together. You talk bonding…the food is exceptional and the people who show up for this are some of the smartest and unique. Yestermorrow truly attracts exceptional individuals. The classes took the passive discussion to new heights and aside from that, Vermont is just stunningly beautiful – an unforgettable learning experience with a retreat flavor.
Passive House New England (http://www.passivehousenewengland.org/) is one of the first independent passive house groups in the country. Many of its members are some of the most experienced CPHCs in the country with one or more certified passive houses under their belts. This group is a great resource for anyone who is interested in building a passive house or building in the North East region. The group has a very active meet up group schedule and hosts a passive house symposium annually in the fall highlighting most recent projects of special interest. Great group: Get involved!
Passivhaus Maine (http://www.passivhausmaine.org/) is carrying flag in Maine in regards to passive house (don’t you love the lobster in the logo?). This is also an area that has very many experienced passive house consultants and builders solidly on their way. This group also is making strides by providing great information and by putting on symposia. Join the meet up group and help getting the word out!
Well, that’s about it–and that’s plenty!
Thanks to NESEA and all the friends out East that have given me the opportunity to do this review and I hope to see a few of you on the BE13 NESEA trade show floor!!!!!!