Step it up from Earth Day to Energy Independence Week

Here’s a great idea from Graham Wright, PHIUS Senior Scientist and Chair of the PHIUS Technical Committee. We hope you’ll take up the challenge.

So, Earth Day was great, and everything. And the Earth Hour there.

Energy Independence Week. It's fun, it's patriotic, and we're virtually certain Stephen Colbert would approve.

Energy Independence Week. It’s fun, it’s patriotic, and we’re virtually certain Stephen Colbert would approve.

But let’s be real, Earth Day doesn’t challenge you to actually do anything in particular, and while Earth Hour does, that is vanishingly little  — one hour out of 8760 is addressing like 0.01% of the problem. After how many years now of Earth Day, what do you say we step the game up?

I call it Energy Independence Week. The idea is that, you extend the 4th of July holiday to a full week, during which you observe these three rules:

1. Use no grid electricity.
2. Burn no fossil fuels.
3. Make no trips to the grocery store.

It’s patriotic and fun. Like a staycation. You’ve got the charcoal grill out anyway. Notice that it’s twice as good even as “1% for the planet” in a couple of ways.

A) it’s 1 out of 52 instead of 1 out of 100, and
B) it’s not just a sacrifice concentrated on you for a diffuse benefit to the planet – it increases your own resilience.

I did this in 2008, a few months before I ever heard of passive house. But I like how it ties in – because of the time of year, it focuses attention on avoiding overheating, not a bad thing. (You will be fine if your passive house is not designed too hot. 😉 And it’s forgiving to the many of us who do not yet live in passive houses; this would be a much harder challenge yet in the winter, in most places.

At the time, I was living in rural Minnesota in a straw bale cottage, so heating and cooling wasn’t a problem. I got by with one solar panel and one battery for electricity. That was enough to run the well pump and my laptop. You don’t need much lighting in Minnesota that time of year. Instead of hot showers I swam in the river, which was a short bike ride away. It’s like camping but, you’ve got all your books or shoes with you.

Your challenges may vary. On rule 3 there, stocking up ahead of time is ok, preparations are part of the idea here. One of the other preparations I made was for irrigation — at the time I was trying to keep a bunch of discount hazelnut seedlings alive in the baking sun. I figured my little panel could not generate enough electricity to run the well pump for that, so I set up a big water barrel so I could gravity feed the orchard. Yeah, I faked it by filling it from the well ahead of time; ideally it would have been a real rain barrel all along.

Again, learning stuff like this is part of the fun. So, I hope you’ll take up the challenge and start planning now. And please, share your strategies, tactics, and experiences in the comments section here at the Klingenblog.

Part 3: NESEA BE13–the passive building journey continues…

 

OK, the finale! In part one we looked at the growth of passive building and how it’s reflected in Passive Place at BE13.

In part two we embarked on the passive building tour of the BE13 trade show floor–mapped to the fundamental principles of passive building.

Today, we introduce some unofficial passive building principles and visit some terrific partners.

Onward!

Unofficial passive building principle No. 6:

ASSURE QUALITY AND MEASURE YOUR SUCCESS!

Only PHIUS+ projects earn the plaque!

PHIUS (www.passivehouse.us) offers certification programs for projects and products. PHIUS+ Certification for new and retrofit applications is the only voluntary certification program in North America that requires a thorough design as well as an onsite third party review process. PHIUS+ certification is the most rigorous on the market–and the best value. That’s because PHIUS has partnered with the Department of Energy and RESNET. That means industry-standard certification protocols for design and onsite verification. And it means one-stop certification shopping. Earning PHIUS+ Certification also nets a HERS rating, DOE Challenge Home Status, and EnergyStar status.

PHIUS+ has jumpstarted certifications. We expect to have fully certified approximately 100 passive building projects by the end of 2013 in North America (if apartments are counted, then the number is closer to 200) and yes, the growth is exponential!

At the 7th Annual North American Passive House Conference in Denver last September, PHIUS launched its Window Data Verification Program. In cooperation with NFRC PHIUS is identifying a North American window data verification protocol and climate appropriate guidelines and recommendations. Several leading window manufacturers have signed on and submitted various window frame and glazing combinations for calculation and verification, and listing in the coming PHIUS window data base.

PHIUS recently partnered with PowerWise Systems–Booth 961 (http://www.powerwisesystems.com/passive) to promote their newest product – the inView Passive™ monitoring package. PowerWise offers all kinds of monitoring solutions for all building types—but we’re really excited about the value that the inView Passive monitoring package brings to our community. For passive builders, the proof is in the pudding–monitored performance is where it’s at. inView Passive includes monitoring dashboards optimized for typical passive house components and systems. We think it’s a great tool for anyone certifying a project through the PHIUS+ Certification and Quality Assurance Program.

Besides verifying predicted performance, monitoring systems like inView Passive can serve as early alerts for routine maintenance. For example, energy consumption might rise because a filter in the ventilator has not been cleaned on schedule. Monitoring also provides safety. Say one of the two ventilator fans fail; this could depressurize the house. Without monitoring, it might take some time to notice that indoor air quality declined, back drafting on vented appliances or fireplaces might have occurred or radon levels might have climbed.

inView Passive includes dashboards for typical passive house systems and components and indoor air aspects. Even a closed ground loop defrost system dashboard is included. Information on ordering the system and prices can be found on PHIUS’s website or on the PowerWise website. PHIUS has negotiated a 5% discount for all PHIUS+ certification enrolled projects and the Promo Code is available through PHIUS when registering.

The Energy Conservatory–Booth 828 (http://www.energyconservatory.com/) is the PHIUS+ Certified Rater’s best friend. Commissioning equipment for low load and airtight superinsulated homes has become more sophisticated and is now affordable.  What exactly has to be commissioned and tested? The most obvious—the air-tightness of the envelope needs to get tested during construction and then again upon project completion. For very tight homes the rater can now use the Mini-Fan Blower Door System, a duct blaster in a newly developed red door insert to test the entire building, A small fan is all it takes if the home is that tight! The mechanical ventilation system also has to be commissioned and flows have to be verified. Very small ventilation air flows need to be measured. The Energy Conservatory Flow Blaster Accessory measures air flows at diffusers down to very low levels such as 10 CFMs. And lastly FLIR infrared cameras are used to check insulation quality, thermal bridging and also interior surface temperatures. Indispensable tools throughout QAQC process to verify a building has been built as designed and performs.

 

Unofficial passive building principle No. 7:

SPREAD THE WORD, SHARE THE TALE AND TEACH ALL YOU HAVE LEARNED

The leading national passive building research, education and alliance organizations are the Passive House Institute US (PHIUS) (www.passivehouse.us) and the Passive House Alliance US (PHAUS) (www.phaus.org).

PHIUS was founded by myself and Mike Kernagis in 2003, initially as Ecological Construction Laboratory, a non-profit, promoting and building passive houses for low income home buyers. It changed its name later to Passive House Institute US when it went national. Since 2008 PHIUS has been offering the hugely successful CPHC®Passive House Consultant training nationwide (NEW in 2013: Virtual segment online saving cost and travel time), we have added Certified PHIUS+ Rater trainings and PHIUS Certified Builder trainings over the last few years. We have trained more than 800 architects, engineers, energy consultants and builders and have certified more 500 of them as CPHCs, PHIUS Certified Builders and PHIUS+ Raters in the US and Canada. These are the folks you want on your passive building team!

In 2013 the renowned Fraunhofer Institute for Building Physics, PHIUS and Owens Corning collaborated on a new next-generation passive building modeling tool – WUFI© Passive. WUFI Passive now replaces PHPP as the backbone tool of the CPHC training. Like PHPP, the tool includes a static passive house energy balancing capability. But it also offers dynamic whole building energy modeling and individual component hygrothermal analysis. And it covers another critical modeling variable: thermal mass, which is necessary for the cooling energy balance. In WUFI Passive all of these assessments use the same project data; no double entry of project data in multiple modeling tools is necessary. Risk and performance management all in one. This tool is seriously cool!

In 2009 PHIUS launched a membership/chapter program, the Passive House Alliance US (PHAUS). The mission: to support the community of professionals who had been trained, to educate the public, and drive the market by involving manufacturers and advocating for making passive building standards the norm in North America. Since Mark Miller took on the Executive Director role of this ambitious program in 2011, PHAUS has a thriving and growing membership program, now up to 350 members. PHAUS’ manufacturer sponsors program (amongst them founding sponsor CertainTeed and Rocky Mountain Institute) is growing, as is the chapter organization—now up to 13 nationwide Chapters with two pending.

PHIUS and PHAUS have significantly shaped the landscape of passive buildings in America over the past 10 years and will continue on our mission: the transformation of the marketplace to make passive buildings commonplace. We are a non-profit and if you like what we have done so far and would like to help, you can donate to PHIUS, become a PHAUS member, or certify and train with us.

Building Science Corporation (http://www.buildingscience.com/)  has been a leader in high performance building consulting and education for decades. BSC Principal Joe Lstiburek was a pioneer way back in the 1970s; that’s why at his keynote address at last year’s 7th Annual North American Passive House Conference, he closed his presentation with: “You guys are family.” I was totally moved—and I wasn’t alone. It was inspiring. Joe started building superinsulated buildings in the late 70s when he was just 23 years old!!! The details matched what we consider to be good passive building practice today. He has been on the forefront all along – vapor retarders, thermally broken fasteners, insulated foundation systems, energy heel trusses and even earth tubes (which he is not a great fan of )(link to his article). He knows what the trenches look like.

Building on that energy from the conference, BSC and PHIUS resolved to work together in promoting passive buildings. A first step: We decided to cooperate on the Passive Building University which lives on the PHAUS website (link): BSC bookends PHIUS executive certification classes with a Building Science Fundamentals program, the ultimate preparation for the CPHC Passive House Consultant class. BSC also offers Advanced Hygrothermal Analysis, truly building a science master class. I encourage you to visit BSCs table as they have the best selection of  cutting edge literature that applies to passive buildings. Be prepared to spend some money and schlep books home!

The most recent Yestermorrow CPHC class.

Yestermorrow Design/Build School (http://www.yestermorrow.org/) This past December I arrived in Warren, Vt.,for the second CPHC class offered through the Yestermorrow Design/Build school. Yet another full class, intense and dynamic.

How is Yestermorrow different? It teaches all modules in person on 8 consecutive days with the exam on the 9th. People are on site 24/7, they form study and discussion groups beyond the class time and prep for exam together. You talk bonding…the food is exceptional and the people who show up for this are some of the smartest and unique. Yestermorrow truly attracts exceptional individuals. The classes took the passive discussion to new heights and aside from that, Vermont is just stunningly beautiful – an unforgettable learning experience with a retreat flavor.

Passive House New England (http://www.passivehousenewengland.org/) is one of the first independent passive house groups in the country. Many of its members are some of the most experienced CPHCs in the country with one or more certified passive houses under their belts. This group is a great resource for anyone who is interested in building a passive house or building in the North East region. The group has a very active meet up group schedule and hosts a passive house symposium annually in the fall highlighting most recent projects of special interest. Great group: Get involved!

Passivhaus Maine (http://www.passivhausmaine.org/) is carrying flag in Maine in regards to passive house (don’t you love the lobster in the logo?). This is also an area that has very many experienced passive house consultants and builders solidly on their way. This group also is making strides by providing great information and by putting on symposia. Join the meet up group and help getting the word out!

Well, that’s about it–and that’s plenty!

Thanks to NESEA and all the friends out East that have given me the opportunity to do this review and I hope to see a few of you on the BE13 NESEA trade show floor!!!!!!

 

Invest in passive houses and buildings: Donate today!

Hi folks,

It’s Mike Knezovich again, guest-blogging. In a previous post, I wrote about how I came to the passive house concept and to PHIUS.

TrekHaus town homes in Portland, Ore., by Rob Hawthorne.

You all have gotten here via your own route—perhaps you’re a builder who found PHIUS looking for a newmarket and a way to build better. Or an architect eager to push the envelope in every sense of the word. Maybe your focus is affordable housing, or you’re an educator who wants to put your students on the path to high performance building.

Or maybe you’re not in the industry, and you simply want to cut carbon emissions for environmental reasons.

Thanks to you all, passive house is poised to bust out from a boutique program to the mainstream market. With your help, PHIUS has worked hard to put a comprehensive foundation in place:

  • Five years since launching the first and only passive house consultant training program geared to North America, PHIUS has trained more than 800 design professionals across the continent. More than 400 have gone on to pass a written exam and design exercise to earn status as a CPHC® (Certified Passive House Consultant). They’ve gone on to build successful single-family, multi-family, commercial and retrofit projects; there are hundreds now in the certification process.

First PHIUS Builders Training, Urbana, Ill., August, 2012.

  • The new Builders Training program—the first and only based on North American experience—launched in August 2012. It will be offered across the country in 2013. That means the 400+ PHIUS CPHCs will find more and more trained construction partners moving forward.
  • The United States Department of Energy has recognized PHIUS+ Certification—that means that starting next year PHIUS+ certified buildings will earn US DOE Challenge Home status and attending benefits. And moreover, it was a giant step forward, as the U.S. DOE has validated the value of PHIUS+ and passive house principles as the path to zero energy.

A screenshot from the new WUFI Passive software tool.

  • PHIUS has partnered with Fraunhofer IBP and Owens Corning to help develop WUFI Passive, the next-generation passive energy-modeling tool. Finally, the North American passive house design community will have a 21st century software tool, with a modern user interface, that will evolve as building science evolves.
  • PHIUS has partnered with the esteemed Building Science Corporation, a relationship that will help expand training programs and opportunities.
  • The PHIUS Technical Committee is hard at work generating technical papers, reviewing the standard to make it make sense across North America, certifying window data,  developing a partnership with NFRC to help jumpstart the market for passive house quality windows in North America.
  • PHIUS’ affordable housing program—e-co lab—just finished its third successful affordable passive house project that is now drawing attention from the Illinois Department of Commerce and Economic opportunity (DCEO). And housing development partners across the country have affordable projects—including multifamily—rolling.

DonateNow The cornerstones are in place—and we’re at a tipping point. We need your help to streamline processes so that we can review and certify more building faster, offer expanded training programs, develop curricula for the higher education market, expand research efforts, and grow outreach programs like the Annual North American Passive House Conference.

I know you’ll receive a lot of pleas for support this holiday season—please put PHIUS at the top of your list. Donations are fully tax deductible, and you can give online, securely, via our partnership with the non-profit Network for Change.

Your gift is a great investment in America’s energy future, in the rebounding design and building industry and on the ultimate goal of reducing carbon emissions.

Join me (I gave at the office and online) and please, donate now!

Appreciatively,

Mike Knezovich